An automatic watch can run for years without showing any obvious signs of weakness.
Yet inside the case, the movement may be gradually deteriorating.
Lubricants dry out, gaskets lose their elasticity, accuracy slowly drifts and some components may begin operating with insufficient lubrication.
A watch that still keeps good time is therefore not necessarily in perfect mechanical health.
How an automatic watch should be maintained depends first and foremost on how it is used.
A watch worn every day and exposed to water, shocks, perspiration, temperature changes or magnetic fields will not age in the same way as a watch worn only occasionally and treated with care.
The same movement may therefore require servicing sooner or later depending on the conditions in which it is used.
This guide explains when an automatic watch should be serviced, which warning signs to look out for, the best everyday practices to adopt and why preventive maintenance remains the best way to preserve a mechanical watch over time.
Why watch maintenance depends on how the watch is used
An automatic watch is a mechanical object made up of many moving components.
Wheels, pinions, springs, jewels, the balance wheel, oscillating weight, bridges and mainplate: every component has a specific role.
When the watch is running, these parts interact continuously.
To limit wear, certain friction points are lubricated with specialist oils.
These lubricants do not last indefinitely.
Over time, they deteriorate, migrate, dry out or lose their effectiveness.
When lubrication becomes insufficient, the movement may continue to run, but its components no longer operate under ideal conditions.
Wear increases, accuracy deteriorates and what could have been a straightforward service may turn into a more substantial repair.
This is why you should not wait for an automatic watch to fail before having it maintained.
Lubricants: the key factor
Lubricants play an essential role in a mechanical movement.
They reduce friction, limit wear and help the movement maintain a consistent rate.
A watch worn regularly places its lubricants under constant load.
A watch worn in demanding conditions places even greater demands on them: humidity, shocks, temperature variations, pressure, perspiration, dust or sand.
Conversely, a watch stored for several years without being worn is not necessarily being preserved.
Lubricants can deteriorate over time even if the movement runs very little.
Long-term storage therefore does not remove the need for maintenance.
Whether a watch is worn intensively or left unused for long periods, its lubrication will eventually become less effective.
Water-resistance gaskets: invisible but essential
Gaskets provide water resistance at the watch’s most vulnerable points: the crown, caseback, crystal and pushers when fitted.
They are generally made from flexible materials that naturally deteriorate over time.
As they age, they harden, compress, lose their elasticity and become less effective at protecting the case.
The problem is that this deterioration is not always visible.
A watch may appear perfectly water resistant until the day moisture enters the case.
At that point, damage can occur quickly: oxidation, condensation beneath the crystal, marks on the dial and corrosion of movement components.
This is why water resistance should be checked regularly, especially if the watch is frequently exposed to water.
How often should an automatic watch be serviced?
For an automatic watch worn regularly, arranging a service from around the five-year mark is a reasonable recommendation.
This interval may vary depending on use, movement type, wearing conditions and the manufacturer’s recommendations.
Some brands specify longer intervals for certain modern calibers.
However, these intervals often assume moderate, careful use with limited exposure to demanding conditions.
For a watch worn daily in real-world conditions, five years remains a prudent baseline.
A diving watch, field watch, work watch or a watch worn during physical activities deserves more regular attention than a dress watch worn only a few days each month.
Uses that require greater attention
Certain activities can accelerate the aging of an automatic watch.
-
Regular diving or swimming: pressure, humidity, salt, chlorine and temperature changes place significant stress on the gaskets.
-
Intensive professional use: shocks, dust, humidity and repeated movement can accelerate wear.
-
High-impact sports: direct or repeated shocks can affect the movement.
-
Exposure to magnetic fields: phones, speakers, magnets, computers and induction hobs can affect accuracy.
-
Long-term storage: a watch that is rarely worn may still need servicing because its lubricants continue to age.
-
Complicated watches: GMT, chronograph and other complications add components and additional friction points.
The more demanding the conditions, the more closely you should monitor the watch for signs of wear.
Warning signs to look out for
You should not wait for a complete failure before consulting a watchmaker.
Certain symptoms suggest that an automatic watch should be inspected.
-
Unusual rate deviation: the watch is gaining or losing significantly more time than before.
-
Reduced power reserve: the watch stops sooner than usual after being worn or wound.
-
Difficult winding: the crown catches, becomes stiff or feels unusual.
-
Abnormal time-setting: the hands no longer move with their usual smoothness.
-
Unusual noise: rubbing, squeaking or knocking that differs from normal operation.
-
Condensation beneath the crystal: a sign of moisture inside the watch and therefore an urgent issue.
Condensation under the crystal should always be taken seriously.
In this situation, stop wearing the watch and take it to a watchmaker as soon as possible.
Moisture can cause significant damage in a very short period of time.
Testing on a timing machine
Before carrying out a full service, a watchmaker can test the watch on a timing machine.
This instrument measures the movement’s rate, amplitude and other parameters useful for diagnosis.
Testing can be carried out in several positions to assess how the watch behaves in real-world conditions.
This does not replace a service, but it can indicate whether the watch is already showing significant rate deviation or abnormal mechanical behavior.
If the results are good, it may sometimes be possible to postpone the service.
If the results are deteriorating, it is better to intervene before wear becomes more expensive to repair.
Best practices for everyday wear
Maintaining an automatic watch is not only about periodic servicing.
Everyday habits play an important role in its longevity.
A watch that is used correctly will generally age better than one worn without care.
These precautions are simple, but they make a real difference.
The crown: one of the most common weak points
The crown is one of the most sensitive areas of a watch.
It is used for winding, setting the time and sometimes adjusting the date.
But it is also a potential entry point for water and moisture.
Before any contact with water, make sure the crown is fully closed.
On a watch with a screw-down crown, it should be properly screwed down against the case.
With a push-pull crown, greater caution is required even if the watch has a stated water-resistance rating.
For swimming or diving, a screw-down crown remains the safest solution.
This is particularly important for diving watches and watches that are regularly exposed to water.
Why you should avoid wearing a watch in the shower
The shower is one of the most demanding environments for a watch.
It combines heat, dynamic water pressure, steam and chemicals.
Hot water causes materials to expand. Steam can penetrate more easily than liquid water. Soaps, shower gels and shampoos can degrade gaskets.
Even a watch rated as water resistant may experience faster gasket deterioration if regularly worn in the shower.
It is therefore better to remove your watch before showering.
This advice applies even to sports watches.
A watch’s water resistance is designed to withstand water under specified conditions, not repeated exposure to heat, steam and chemicals.
Rinse and dry after exposure to salt or chlorinated water
After swimming in the sea or a pool, rinse the watch thoroughly with clean fresh water.
Salt and chlorine can affect gaskets, finishes, the strap or bracelet, and certain metal surfaces.
After rinsing, dry the watch with a soft cloth.
This simple step helps limit deposits and preserve the watch’s external condition.
Avoid unnecessary shocks
An automatic watch remains a precision mechanical object.
It may be robust, but it is not indestructible.
Direct impacts to the wrist, repeated vibration or violent shocks can affect the movement.
Some sports present greater risks than others: contact sports, tennis, golf, CrossFit or activities involving repeated impacts.
A well-designed sports watch may withstand active use, but it is still important to remain consistent with the way the watch was designed to be used.
A dress watch is not intended to be worn under the same conditions as a technical sports watch.
Be careful around magnetic fields
Magnetism can affect the rate of a mechanical watch.
A magnetized watch may gain significant amounts of time, sometimes several minutes per day.
Potential magnetic sources are everywhere: smartphones, speakers, computers, magnetic clasps, headphones, induction hobs and magnets used in bags or accessories.
It is therefore best to avoid placing your watch directly on or against these objects.
The good news is that demagnetising a watch is generally quick and straightforward for a watchmaker.
But avoiding repeated exposure remains the best approach.
What should you do when the watch is not being worn?
If an automatic watch is left unworn for several weeks, it can be manually wound occasionally.
A few turns of the crown are enough to get the movement running again.
There is no need to overwind it.
For long-term storage, choose a dry, stable location away from direct sunlight, humidity and magnetic sources.
A watch winder can be useful for certain complicated watches that are difficult to reset.
But it is not essential for a simple automatic watch.
A poorly adjusted watch winder, or one used continuously, may even place unnecessary strain on the movement.
For a watch worn regularly, the wrist remains the best watch winder.
What does a full service include?
A full service is a structured technical procedure.
It involves far more than opening the watch and checking whether it runs.
Depending on the condition of the watch and the type of movement, it may include:
-
initial diagnosis;
-
dismantling the movement;
-
cleaning the components;
-
inspecting the parts;
-
replacing the gaskets;
-
replacing worn components where necessary;
-
applying the correct lubricants to the various friction points;
-
reassembling the movement;
-
regulating its accuracy;
-
testing it in several positions;
-
carrying out water-resistance testing where required.
A proper service takes time.
It requires appropriate tools, specialist consumables and genuine watchmaking expertise.
This is what accounts for its cost.
How much does an automatic watch service cost?
The price of a service depends on the movement, its complexity and the condition of the watch.
A simple three-hand watch does not require the same amount of work as a chronograph or GMT.
The cost does not depend solely on the value of the watch.
It depends primarily on the work required on the movement.
Preventive servicing is generally less expensive than repairing a watch after a period of neglect.
If a movement has been running for too long with dried-out lubricants, some components may experience premature wear. Costs can then rise quickly.
Indicative Akrone servicing prices
| Movement type | Indicative price | What is included |
|---|---|---|
| Three-hand automatic | €200 to €250 | Dismantling, cleaning, lubrication, gaskets, regulation, tests |
| GMT or chronograph | €250 to €450 | Full service including work on the complication |
| Replacement parts | Quotation | Worn, damaged or model-specific parts requiring replacement |
These prices are indicative and may vary depending on the actual condition of the watch.
A quotation should always be provided before any work is carried out.
For an Akrone watch, service requests can be submitted through the after-sales service.
Discounted watches, older watches and dormant stock
An automatic watch can be commercially new while already being mechanically older.
A watch that has spent a long time in stock, been displayed in a shop window, handled or regularly reset may not be in the same mechanical condition as a watch that has recently been assembled and tested.
Its gaskets have aged. Its lubricants have begun to deteriorate. Its accuracy may have changed.
This does not mean that discounted or display watches should automatically be avoided.
But this reality should be taken into account when purchasing.
A substantial discount may still represent good value if you understand that the watch may require inspection or servicing sooner.
The real question is not simply the advertised price.
It is the actual mechanical condition of the watch, its history and the quality of the support offered by the seller.
Choosing the right watchmaker for a service
During the warranty period, the watch should be handled by the brand’s own workshop.
Third-party intervention may invalidate the warranty, even if the work is carried out correctly.
Once the warranty has expired, a qualified independent watchmaker can perfectly well service a standard automatic movement.
Lubricants, gaskets and common wear components are available from specialist suppliers.
The limitation concerns components specific to the watch itself: case, dial, hands, proprietary crystal, crown or certain parts designed specifically for a collection.
For these components, it is often necessary to return to the brand.
Before entrusting a watch to a workshop, check a few simple points:
-
does the workshop have a timing machine?
-
does it provide a written quotation before carrying out the work?
-
does it give a realistic lead time?
-
is water-resistance testing included where necessary?
-
does the price seem consistent with a genuine full service?
A proper service is not completed in 48 hours.
An unusually short turnaround time or exceptionally low price may indicate that some stages of the process are being omitted.
The Akrone workshop: servicing, regulation and after-sales support
The Akrone workshop handles the servicing and long-term support of the brand’s collections.
The advantage is straightforward: the watches are handled by a team familiar with the models, movements, specifications and requirements of each collection.
The process includes diagnosis, the appropriate technical work, regulation and the necessary checks before the watch is returned.
Movements are regulated to an accuracy target consistent with the brand’s standards.
Certain Akrone-specific components remain exclusive to the workshop: cases, dials, crystals, hands and parts unique to particular collections.
For routine servicing outside the warranty period, an independent watchmaker can work on standard movement components.
But for a complete restoration or the replacement of model-specific parts, returning the watch to the Akrone workshop is recommended.
Frequently Asked Questions
My watch is running well. Does it still need servicing?
Yes, if it has reached the recommended service interval or has been subjected to demanding use.
A watch can appear to be running correctly while its lubricants are deteriorating or its gaskets are aging.
Preventive servicing often helps avoid more substantial repairs.
Can you shower with a water-resistant automatic watch?
It is better not to.
A shower combines heat, steam, water pressure and chemicals. This environment accelerates gasket deterioration even on a water-resistant watch.
What is the difference between a screw-down crown and a push-pull crown?
A screw-down crown locks mechanically against the case.
It provides greater protection against water, provided it is properly closed.
A push-pull crown is simpler but may offer less protection for immersion or repeated swimming.
Does a watch that is rarely worn still need servicing?
Yes, because lubricants age over time even when the watch is barely running.
A watch stored for long periods may therefore require a service or at least an inspection.
How long does a full service take?
The turnaround time depends on the workshop, the time of year and the complexity of the movement.
A proper service generally takes several weeks because it includes diagnosis, technical intervention, regulation and testing.
Should a pre-owned watch be serviced?
If its service history is unknown, having it inspected is recommended.
A pre-owned watch may appear to run correctly while still being due for a service in the near future.
The potential cost should be taken into account when assessing the purchase price.
Why do some brands recommend ten years between services?
Some modern calibers and lubricants allow longer service intervals under controlled conditions of use.
However, for a watch worn every day and exposed to water, shocks or temperature variations, earlier servicing may be preferable.
Key takeaways
Automatic watch maintenance depends on how the watch is actually used.
A watch worn regularly and exposed to water, shocks or dust will require more attention than one worn only occasionally.
A simple guideline is to consider a service from around five years for a watch that is worn regularly.
You should intervene sooner if there is significant rate deviation, reduced power reserve, condensation beneath the crystal or any unusual behavior.
Everyday precautions are essential: check the crown, avoid showering with the watch, rinse it after exposure to seawater or pool water, dry it carefully, avoid unnecessary shocks and limit exposure to magnetic fields.
Preventive servicing costs less than repairing damage caused by neglect.
It is also what allows a mechanical watch to remain reliable, accurate, repairable and capable of being passed on over time.
A well-maintained automatic watch is not simply a watch that runs.
It is a watch you can continue wearing for many years.