12:12

Why Are Watch Prices Increasing? Understanding the True Cost of a Mechanical Watch

Pourquoi les montres coûtent de plus en plus cher ? Le vrai coût d’une montre automatique

Why does an affordable automatic watch cost more today than it did ten years ago?

It is a question that comes up frequently.

And it is a legitimate one.

Watch prices have increased, including among independent brands that are still trying to offer the best possible value for money.

This increase is not limited to major luxury houses.

It also affects microbrands, workshops, component manufacturers, movement suppliers and brands working with limited production runs.

A watch that cost €500 or €700 a few years ago may now sell for €900, €1,200 or €1,500 with broadly similar specifications.

But this increase does not come from a single cause.

It is the result of a combination of factors: raw materials, movements, labor, overheads, transport, energy, quality control, small production runs, after-sales service and rising customer expectations.

The real issue is not simply that a watch costs more.

The real question is what you are actually paying for.

Does the price fund a better movement? Proper regulation? A workshop? Genuine after-sales service? Better materials? More controlled production?

Or does it mainly fund marketing, intermediaries and brand image?

That distinction is what really matters.

Inflation affects far more than the final retail price

When people talk about inflation, they often think only about the price paid by the customer.

But for a watch brand, inflation takes effect long before the watch reaches the market.

It affects component costs, movement prices, wages, overheads, workshop expenses, transport, insurance, energy, packaging, inspections and sometimes production lead times.

A watch is made up of many individual elements.

Case, crystal, dial, hands, crown, gaskets, movement, strap or bracelet, buckle, caseback, surface treatment, engraving, presentation box and quality control: every one of these can become more expensive.

When several of these costs rise at the same time, the overall impact becomes significant.

A brand can absorb part of these increases for a while.

But it cannot absorb everything indefinitely without weakening its workshop, after-sales service or product quality.

Raw materials have become more expensive

A mechanical watch uses very tangible materials.

Steel, titanium, brass, aluminum, ceramic, sapphire crystal, rubber, leather, surface treatments and machined components: none of these are abstract costs.

Every material depends on global supply chains.

Energy prices, transport costs, geopolitical tensions, industrial capacity and order volumes all have a direct impact on pricing.

The stainless steel used for cases, titanium used in more technical models, sapphire crystal, bezel inserts and straps or bracelets no longer cost what they did ten years ago.

And it is not only the raw material itself that has become more expensive.

So has the cost of transforming it.

Machining a case, polishing a case middle, applying a DLC coating, producing a dial, fitting applied hour markers, manufacturing a hand or machining a buckle all require machinery, energy, time and skilled labor.

The increase therefore does not come only from the material itself.

It comes from the entire process required to turn that material into a usable watch component.

Movements cost more

The movement is one of the most significant cost items in a mechanical watch.

For many years, highly accessible Japanese movements such as the Seiko NH35 made it possible to produce automatic watches at relatively low prices.

The caliber became popular for its robustness, availability and reasonable cost.

But entry-level movements have also become more expensive.

Japanese movements that were once extremely affordable are no longer as inexpensive as they used to be.

The NH35 remains a reliable and relevant movement, but its price has risen considerably compared with the period when it helped make very affordable automatic watches possible.

Swiss movements have also seen substantial price increases.

Sellita, Soprod and La Joux-Perret are not simply generic components.

They are mechanical movements manufactured, tested, supplied and supported within demanding industrial environments.

They cost more to purchase, but they can also offer a different level of finishing, repairability, regulation potential or consistency with certain product ranges.

The choice of movement is therefore never neutral.

It has a direct impact on the final price, but also on perceived quality, accuracy, after-sales support and the long-term durability of the watch.

For a better understanding of these differences, our article on Swiss movements and alternatives to ETA looks in greater detail at Sellita, Soprod, La Joux-Perret, Miyota and France Ébauches.

Labor costs are increasing everywhere

A watch is not simply a collection of components.

It also represents working time.

Design, engineering, prototyping, assembly, regulation, quality control, logistics, customer service, after-sales support, accounting, photography, editorial content and supplier management all require human time.

And the cost of labor is increasing in many countries.

This applies to France, Switzerland, Japan, Europe and many of the industrial regions involved in watch production.

Wages are rising.

Overheads are increasing.

Social, regulatory, energy and administrative requirements place greater costs on companies.

This is not a criticism.

It is an economic reality.

Producing seriously, paying people properly, maintaining a workshop, providing after-sales service and complying with regulations costs more than it used to.

A brand that wants to maintain genuine quality needs to account for these costs.

Otherwise, it eventually has to cut back on what customers do not immediately see: inspection, regulation, after-sales support, time spent on details, spare-parts availability or customer assistance.

Small production runs naturally cost more

Independent watchmaking often operates with limited volumes.

This is even more true for a company producing limited editions, professional projects and targeted collections rather than mass-market volumes.

Small production runs cost more to manufacture.

A dial produced in a run of 200 does not cost the same per unit as one produced in a run of 20,000.

A case developed for a limited edition cannot spread its development costs in the same way as a case produced in very large quantities for ten years.

Fixed costs remain the same, or nearly the same: development, prototypes, tooling, validation, inspections, supplier communication, transport and storage.

But those costs are spread across fewer watches.

This is one reason why a well-made independent watch cannot be compared directly with a mass-produced industrial watch.

The economics are different.

Customer expectations have also changed

Customers today expect more than they did ten or fifteen years ago.

They want sapphire crystal.

They want good water resistance.

They want a reliable movement.

They want a comfortable strap or bracelet.

They want thoughtful design.

They want clean finishing, applied hour markers, strong lume, serious regulation and accessible after-sales service.

These expectations are entirely legitimate.

But they come at a cost.

An affordable automatic watch fifteen years ago might have involved certain compromises: mineral glass, an average strap, a movement with minimal regulation, limited quality control or simpler finishing.

Today, the market is more demanding.

Enthusiasts compare everything: movement, origin, thickness, accuracy, power reserve, finishing, value for money, brand history and after-sales support.

A brand that wants to remain credible has to meet that higher standard.

It cannot simply offer the same product as before with the same level of finishing.

The real issue: a fair price, not the lowest price

In this context, focusing only on low prices is not particularly meaningful.

A watch that is too cheap may conceal several compromises: very inexpensive components, limited quality control, minimal after-sales support, opaque subcontracting, no spare-parts stock, insufficient margins to maintain long-term service or inconsistent quality.

Conversely, an expensive watch is not automatically better.

A high price may also come from marketing, distribution, margin, brand image or a scarcity strategy.

The real question is therefore whether the price is fair.

A fair price needs to cover the actual cost of the watch, the working time involved, quality control, after-sales service, components, development, logistics and a sufficient margin for the brand to remain sustainable.

A brand that cannot operate profitably cannot provide reliable service for years.

A brand that overprices its watches without justification also risks losing customer trust.

The balance lies between the two.

How Akrone works to maintain value for money

At Akrone, value for money is not a marketing argument added after the watch has been developed.

It is a design constraint.

The brand aims to offer serious, well-regulated, well-designed watches with long-term support, without multiplying intermediaries or unnecessary costs.

This approach relies on several principles.

The first is to handle internally what can genuinely be done well in-house.

Design, development, assembly, regulation, quality control, photography, content, customer relations and after-sales service: the more of these steps a brand controls directly, the less it depends on external service providers.

Outsourcing may be necessary in certain areas.

But systematically outsourcing everything increases costs and can sometimes reduce control over the final product.

The Akrone workshop therefore plays a central role.

It makes it possible to inspect watches, regulate movements, handle returns and support collections over time.

This is a practical way of preserving quality without allowing prices to spiral unnecessarily.

Working directly with manufactures

The second principle is to work as directly as possible with manufactures and suppliers.

Every intermediary adds a margin, another communication layer, greater technical distance and sometimes a loss of information.

When a brand works directly with its case, dial, movement or strap manufacturers, it can better understand constraints, negotiate more effectively, correct issues more quickly and monitor production more closely.

Direct relationships do not eliminate inflation.

But they help avoid adding unnecessary costs.

They also make it possible to make more precise choices: the right movement, the right finishing level, the right supplier and the right balance between price, quality and lead time.

Sharing technical platforms

The third principle is the use of shared technical platforms.

At Akrone, certain technical bases can be used both for consumer collections and for professional projects.

This approach matters.

It allows the development costs of a case, architecture, bracelet or technical specification to be spread more effectively.

A diving platform can be used for a consumer collection as well as a project for a specialist unit.

A GMT platform can support an aviation watch, a professional project or a limited edition.

This pooling makes it possible to negotiate higher volumes with suppliers, improve component control and reduce unit costs.

The final customer benefits directly.

They gain access to a proven technical platform without having to bear the full development cost of an isolated project.

This is one of the key differences between intelligent customization and a watch developed in a completely fragmented way.

This approach is directly connected to the way a serious collaboration watch is developed.

Selling direct to customers

The fourth principle is direct sales.

In traditional watch distribution, the final retail price often includes several layers: brand, importer, distributor and retailer.

Each level needs to make a living.

That is entirely normal.

But it inevitably increases the price paid by the customer.

Direct sales reduce the length of this chain.

They also make it possible to maintain a direct relationship with the customer: product explanations, order tracking, after-sales service, advice and feedback.

This model does not remove every cost.

A direct-to-consumer brand still needs to produce content, manage its website, respond to customers, handle logistics and fund its workshop.

But it can reduce the proportion of the final price that goes neither into the product nor into the service surrounding it.

Avoiding unnecessary marketing costs

Another often underestimated expense is communication.

Building awareness around a brand can be expensive.

Photography, video, advertising, influencers, agencies, trade shows, content and press relations can quickly become major cost centers.

At Akrone, the objective is to keep communication as direct as possible.

Show the products, explain the choices, document the constraints, talk about the workshop and answer customers.

The brand needs to communicate.

But it does not need to build an artificial image that eventually has to be reflected in the retail price.

Money saved on unnecessary marketing can be reinvested in the product, regulation, service or simply help maintain a more coherent price.

Why prices cannot always remain unchanged

Even with these efforts, a brand cannot always maintain the same prices indefinitely.

If movements become more expensive, if cases become more expensive, if transport increases, if wages rise and overheads rise, the final price sometimes has to change.

Refusing any price increase may seem attractive in the short term.

But over the long term, it generally creates three risks: lower quality, reduced service or a weaker company.

None of these outcomes benefits the customer.

A durable watch needs a durable company behind it.

The right objective is therefore not to promise that prices will never change.

The right objective is to explain why they change and to ensure that every additional euro corresponds to a genuine product or service reality.

A cheaper watch is not always a better deal

The purchase price does not tell the whole story.

A cheaper watch may appear attractive initially but become less appealing if the movement is difficult to repair, the strap ages badly, water resistance is not properly maintained or after-sales service does not genuinely exist.

Conversely, a slightly more expensive watch may represent better value if it is better regulated, better assembled, more durable and supported by an identifiable workshop.

Value for money therefore goes beyond the specification sheet.

It includes design, materials, movement, assembly, regulation, quality control, after-sales service and the brand’s ability to support the product over time.

This connects directly with our article on the durability of mechanical watches.

The case of Akrone watches

At Akrone, rising costs are a reality.

Movements cost more.

Components cost more.

Labor costs more.

Overheads, transport, quality control and workshop operations all weigh more heavily than before.

The answer is not to lower standards.

The answer is to work more intelligently.

Use shared technical platforms where relevant.

Negotiate more coherent production volumes.

Work directly with suppliers.

Assemble, regulate and inspect in-house wherever possible.

Limit intermediaries.

Sell directly.

Avoid communication expenses that serve neither the product nor the customer.

This method is what allows Akrone to continue defending strong value for money despite a more difficult economic environment.

It is not a promise of low prices at any cost.

It is a search for coherence.

Frequently Asked Questions

Why are mechanical watches more expensive than they used to be?

Because several costs have increased at the same time: movements, raw materials, components, labor, transport, overheads, quality control and after-sales service.

A mechanical watch is a complex industrial product.

Even a small increase in the cost of each component can have a significant effect on the final price.

Are Japanese movements still economical?

They are still often more accessible than many Swiss movements, but they are no longer as inexpensive as they once were.

Movements such as the NH35 remain reliable and relevant, but their prices have risen due to industrial pressures, demand and production costs.

Why not simply reduce margins?

A brand can absorb part of the increase for a while.

But if margins are reduced too far, the workshop, after-sales service, spare-parts stock and the company’s long-term viability all become more fragile.

A durable watch needs a company capable of supporting it over time.

Why does direct sales help maintain better value for money?

Because it reduces the number of intermediaries.

In a traditional distribution model, several parties take a margin between the brand and the final customer.

Direct sales allow a larger proportion of the price to go towards the product, service and long-term support.

Why share technical platforms?

Because developing a technical platform is expensive.

If it can be used across several collections or professional projects, the cost is distributed more effectively.

This makes it possible to produce technically coherent watches without requiring a single small production run to bear the entire development cost.

Is a more expensive watch necessarily better?

No.

A higher price can reflect quality, but it can also reflect marketing, distribution or margin.

What matters is what the price actually pays for: movement, materials, assembly, regulation, quality control, after-sales service, design and durability.

How can you recognize good value for money?

Good value for money is based on coherence.

The movement should suit the project.

The materials should suit the intended use.

Assembly and regulation should be carried out seriously.

After-sales service should genuinely exist.

And the brand should clearly explain its choices.

Key takeaways

The increase in watch prices does not come from one single cause.

It results from a broad rise in costs: raw materials, movements, labor, overheads, transport, energy, quality control and service.

For an independent brand, maintaining good value for money therefore requires a genuine method.

Handle work in-house where possible.

Limit intermediaries.

Sell direct.

Share technical platforms.

Negotiate directly with suppliers.

Maintain a workshop capable of assembling, regulating, inspecting and supporting watches over the long term.

A fair price is not the lowest possible price.

It is the price that makes it possible to produce a coherent, reliable, durable and properly supported watch without charging the customer for costs that do not genuinely benefit the product.

That is the approach that allows an independent watch company to remain faithful to its ambition: offering the best possible watch at the fairest possible price.

Back to articles